鲜花( 48) 鸡蛋( 0)
|
also check this:* T6 M d3 n* j2 V
. F! {, r7 @' L. f* X, u& `5 aPressing for one second arms the system by activating the& Z1 U7 m3 l# i& a
starter kill and locking the doors (if the door locks are connected).
* s" r# e: _! t5 r- BThe horn will honk (if connected) and the parking lights will flash/ \+ w( s$ i$ I. P1 k
once to confirm arming of the system. While the system is armed,' R: d; ]/ M3 H+ h7 @2 @
the status LED will flash once per second. The Failsafe® Starter Kill
: f0 ?9 O1 e8 f3 k7 e& j(if installed) will also prevent the vehicle’s starter from cranking.
/ N# t0 V; y& z FArming0 W$ p, j1 g7 q) o, g* H
© 2005 Directed Electronics—all rights reserved 90 Z f- M2 R! h4 u2 ]( y! Z
The system can also be programmed to arm the optional Failsafe®
3 E+ F% w# ^! l* l1 |Starter Kill automatically (called Passive Mode). If the system has
7 w1 }4 N$ j- fbeen programmed for Passive Mode, the Failsafe® Starter Kill will
6 J4 @' s- J# Z5 qautomatically activate 30 seconds after the ignition has been! C) b0 c1 [0 s3 T5 W! z/ A
turned off. After the ignition has been turned off, the status LED
4 w2 @2 A$ h$ i$ b+ |2 ?will flash rapidly to indicate that the system is in Passive Mode.9 A6 p7 @4 M1 A! y
If Passive Mode has been programmed on, then it is also possible# D% Y a. F! f+ H
to program the system for Passive Locking. With Passive Locking,) i$ n( t" X6 J
the vehicle doors lock automatically at the same time that the Failsafe®
$ B) A7 R/ p# mStarter Kill is activated. If Passive Locking is programmed on, care
) k( n x7 U: Z' k5 ~0 _; @must be taken to prevent the keys from being locked in the vehicle.
, w8 l4 s& w/ o" ONOTE: For Passive Mode to be effective, the Failsafe® Starter Kill relay0 s' H) \# n6 a0 W
must be installed.
& k* p; ]+ Z( }0 U. O2 |Pressing for one second disarms the system and unlocks the, ~7 U2 i( G' \8 p5 x& t7 c9 Q
doors (if connected). The horn will honk twice (if connected) and; t0 O: d. P: E+ F9 X: ]/ z
the parking lights will flash twice to confirm disarming of the system.% J0 j9 n* y/ @+ a& k
The optional Failsafe® Starter Kill will be deactivated. The status% t6 X9 Y) I! g. K, Z4 ]' R0 ^' A
LED will turn off, unless the system is programmed for Passive
* ?2 U5 h+ w" l& E& g3 T6 s- F2 {9 OMode. In Passive Mode, the status LED will flash rapidly when the) Z8 g7 z, {0 P& {% a" w# |( f! P
system is disarmed. This indicates that the system will re-engage# \* P" [# {' o, M% M2 `
the starter kill and re-lock the doors (if Passive Locking has been
# |6 n" ^% r: F- C" \. `: Cprogrammed) in 30 seconds unless the ignition is turned on.2 j/ ]; T5 t& b. \( D
Disarming$ [' `! R7 C( R
10 © 2005 Directed Electronics—all rights reserved4 {- C% z I2 T/ X- _
If your remote transmitter is lost or damaged, you can manually) E, w! @( M- S8 ~! C4 r4 u
override the starter kill. To do this, you must have the vehicle's
2 v \0 r; N1 R1 yignition key and know where the Valet button is located. Be sure
( D; J% L. {4 u1 n! j* nto check with the installer for the location of the Valet button.
4 v/ G8 G" c- q- dTo override the starter kill, turn
, Z9 B9 j' e( K4 J/ J F. f! Nthe ignition on and press the, L- T6 u5 B- _7 W. n. I/ R
Valet button within 10 seconds.) K8 B) s6 v- |; ~3 v1 `! ]+ ]% a
The status LED will stop flashing
, a. Y* b& M( F8 Dand the vehicle should start. If it does not start,
6 \0 _" C( ?' c; nyou may have waited too long; turn the ignition off and repeat the
7 ~+ l1 u3 W, Y2 fprocess.
, P- m! M9 ?1 P s/ C4 S. R6 cLOCATION OF VALET BUTTON_____________________________
8 h) \5 {3 ^/ n2 a9 n; R- C/ gYou can prevent your system from automatically activating the' F! R/ Z1 {' E) [
Failsafe® Starter Kill and locking the doors by using Valet Mode.
$ U) [2 X) k6 o ]This is very useful when washing the vehicle or having it serviced.* m( w: e/ \2 B9 U
In Valet Mode, the starter kill cannot be activated, even with the1 |! Y; D! @$ I( @4 C$ @
transmitter, but all convenience functions (door locks, remote1 _; e; `# [; n$ q: n+ a
start, etc.) will continue to work normally. |
|